Mount Dora Drywall Pros | Installation & Repair

Commercial and Residential Drywall Services in Mount Dora, FL

Commercial & Residential Drywall Services in Mount Dora, FL

Mount Dora Drywall Pros does drywall work for homes and businesses. We serve Mount Dora, FL. We serve the communities of Lake County. Our customers are homeowners. They are property managers. They are general contractors and business owners.

They need drywall work they can count on. We install drywall. We repair it. We replace it. We do framing and finishing. A scope can include gypsum board. It can include 1/2-inch or 5/8-inch drywall. It can include Type X drywall and metal stud framing.

It can include drywall partitions and moisture-resistant board. It can include joint compound and corner bead. It can include Level 4 or Level 5 finish work. We pick the supplies and assemblies to fit each project.

For commercial customers, we support office buildouts. We support tenant improvements and retail renovations. We handle other interior scopes too. The work falls into the building types common in commercial construction. Those types are office and retail. They are healthcare and medical.

They are restaurant and food-service. They are warehouse and industrial. They are multifamily. For home customers, we handle new construction and remodeling. We fix holes and cracks. We fix nail pops and water-damaged board. Each estimate is built on the measured scope.

So the work we do matches the work we planned.

Contact a Drywall Expert

Request a Free Quote

Why Choose Mount Dora Drywall Pros?

Installation scoped to ASTM C840 and GA-216

We install to ASTM C840. That is the Standard Specification for the Application and Finishing of Gypsum Board. We also use the Gypsum Association's GA-216. That is the Application and Finishing of Gypsum Panel Products guide.

The International Building Code cites it as an installation reference. These guides shape how we plan a project. They cover how gypsum board is fastened. They cover how it is taped and finished.

Fire and sound-rated assemblies planned against code-referenced designs

Some projects call for a fire-rated assembly. Some call for an acoustic assembly. For those, we follow the Gypsum Association's GA-600. That is the Fire Resistance and Sound Control Design Manual. It is the source manual for fire-rated and sound-rated assembly designs. The International Building Code references it. National Fire Protection Association codes reference it too. We do not treat one board product as a substitute. A rating takes a complete tested assembly.

Finish level defined before work begins

We set the finish result for each space up front. The scale runs Level 0 through Level 5. We use the Gypsum Association's GA-214 for that scale. It is the Recommended Levels of Finish guide. Four groups developed it together. They are the Association of the Wall and Ceiling Industry (AWCI). They are the Ceilings and Interior Systems Construction Association (CISCA). They are the Painting and Decorating Contractors of America (PDCA). They are the Drywall Finishing Council. So the crew and the customer agree on the result up front.

Coordination across trades and project types

Drywall work has to line up with the rest of the build. That holds for commercial jobs. It holds for home jobs. The scope must fit metal studs and metal track. It must fit insulation, electrical, and plumbing. It must fit HVAC, door openings, and MEP penetrations. We organize the drywall scope around these points. That keeps the install in line with the rest of a buildout or remodel.

Skilled Commercial Drywall Services in Mount Dora, FL

Commercial drywall takes coordination. Wall and ceiling systems must fit the other parts of a building. We provide commercial drywall support. Projects can need gypsum board installation. They can need metal stud framing. They can need drywall partitions. They can need fire-rated assemblies. They can need acoustic work. They can need suspended drywall ceilings. The exact services are confirmed for each project. We work from the drawings on hand. We use measurements, specifications, and site conditions. That sets the drywall scope. We coordinate with other trades. We prepare finished areas for the next stage of construction.

Commercial Drywall Installation

We install commercial gypsum board for interior walls and ceilings. Each job follows the project's specified supplies. It follows the layout. It follows the finish requirements. Commercial work can include office interiors and retail spaces. It can include medical or dental offices. It can include restaurants and warehouses. It can include multifamily tenant improvements. The install can involve board fastening and drywall tape. It can involve joint compound, corner bead, and sanding. It ends with preparation for painting or the next finish.

Metal Stud Framing

We provide metal stud framing for commercial drywall layouts. These layouts specify cold-formed metal studs and metal track. Framing can include interior partitions. It can include door openings, backing, soffits, and bulkheads. It can include other wall or ceiling structures. Those structures must coordinate with architectural plans. They must coordinate with MEP penetrations. We set this framing layout first. That gives the drywall install a defined structure to follow. It helps keep finished walls straight. It keeps them properly supported.

Fire-Rated Drywall Installation

We install Type X drywall as part of a specified fire-resistance assembly. Type X board alone does not make a wall or ceiling fire-rated. The rating depends on the complete assembly. The assembly must be tested or UL-listed. Designs sit in the Gypsum Association's GA-600. That is the Fire Resistance and Sound Control Design Manual. An assembly includes board layers. It includes framing, fasteners, and insulation. It includes joints, penetrations, and required firestopping. We review the specified assembly first. Then we install the drywall parts to the project requirements.

Drywall Partition Installation

We install commercial drywall partitions for many spaces. They include offices and conference rooms. They include corridors, restrooms, and tenant suites. The specifications set the build. A partition can use standard supplies. It can use fire-rated supplies. It can use moisture-resistant or impact-resistant supplies. It can use acoustic supplies. We coordinate partition locations before we finish the walls. We check openings and electrical boxes. We check plumbing, HVAC, and insulation.

Soundproof and Acoustic Drywall Installation

For projects with acoustic requirements, we build assemblies to the specifications. An assembly can include sound-attenuation batt. It can include resilient channel and acoustic sealant. It can include multiple board layers. It can include staggered or separated studs. We reference sound-rated designs. Those designs sit in the Gypsum Association's GA-600 manual. Acoustic performance depends on the complete wall or ceiling assembly. Doors affect it. Electrical boxes affect it. HVAC pathways affect it. Flanking paths affect it. We do not promise a specific STC result. A promise takes an applicable engineered design. Or it takes a verified testing requirement.

Suspended Ceiling Installation

We install suspended drywall ceiling systems to the project layout. The work includes soffits and bulkheads. It includes ceiling drops and access openings. Ceiling work can need coordination. We plan around lighting. We plan around HVAC diffusers. We plan around sprinkler heads and fire alarm devices. We set these locations before finishing. That reduces conflicts. It gives a cleaner transition between the drywall and other installed parts. Do you have an occupied office? A retail space? A tenant suite? We also handle commercial drywall repair there. We fix impact damage, cracks, and failed joints.

Expert Residential Drywall Services in Mount Dora, FL

We serve homeowners and remodelers. We serve home property owners in Mount Dora. We serve nearby Eustis, Tavares, and Leesburg too. Mount Dora Drywall Pros provides drywall services for new construction. We provide them for remodeling. We provide them for repairs, replacements, and finishing. We can fix a single damaged area. We can take on a larger scope. A larger scope can cover rooms, ceilings, and garages. It depends on what each project requires.

Residential Drywall Installation

We install drywall for residential construction and remodeling projects. The spaces include bedrooms and kitchens. They include living rooms and hallways. They include basements and other interior spaces where drywall is specified. We coordinate the board install with other work. We check framing and insulation. We check electrical work. Then we complete the taping and finishing stages. The finished surface is ready for texture or paint.

Residential Drywall Repair

We repair localized drywall damage. That includes holes and cracks. It includes nail pops and loose tape. It includes damaged corners. It includes settlement-related cracking. Our process can include a few steps. We remove unstable material. We work on patching the affected area. We apply joint compound. We sand the surface. We prepare it for paint. Is there an existing texture? Then we assess the surrounding finish. We decide whether texture matching is appropriate.

Drywall Replacement

Some damaged drywall is better replaced than patched. We can replace drywall that is saturated. We can replace board that is severely cracked. We can replace board that is delaminated or otherwise deteriorated. Replacement must be the better choice than a repair. We identify the affected area first. We confirm the scope of removal. Then we install new board. Then we complete the finishing work.

Water Damage Drywall Repair

We repair drywall affected by plumbing leaks. We repair board hit by roof leaks. We repair board hit by appliance failures. We repair board hit by other sources of water intrusion. The damaged board may need to come out. It may need replacement. That happens after the moisture issue is fixed. It happens after proper drying has been coordinated.

Drywall Ceiling Repair

We repair residential drywall ceilings. They can have cracks or stains. They can have punctures or sagging. They can have water damage. The work depends on the condition. We may remove damaged material. We check the supporting structure. We repair or replace the drywall. We match the surrounding texture. We prepare the ceiling for paint. We plan around nearby fixtures too. Those include lighting fixtures and HVAC grilles. Does an older ceiling still have a sprayed acoustic texture? We can also handle popcorn ceiling removal before refinishing.

Garage Drywall Installation

We install drywall in attached garages, detached garages. We install it in similar home spaces too. The space must be in the project scope. This work can involve coordination. We plan around insulation and framing. We plan around electrical work and ceiling layouts. We set the finish level that fits the space. Does code require a fire separation? That is the wall between the garage and the house. If so, we build it to the required rated assembly.

Our Drywall Installation, Repair, and Replacement Process in Mount Dora, FL

1. Consultation & Project Review

Every project starts with a consultation. We review the work you request. It can be drywall installation. It can be repair or replacement. It can be finishing work. We talk through what needs to be done. We identify the general scope. We do that before anything is scheduled. This step sets the basic scope of the project.

2. Measurements, Photos & Scope Definition

Next, we review the details. We look at measurements and photos. We look at plans and specifications. We look at the affected areas on hand. This information gives us a clearer picture. We see what the space actually requires. That creates a clearer basis for the drywall estimate that follows.

3. Board, Framing & Finish-Level Planning

We then identify the board types for the job. We look at framing needs. We look at insulation coordination. We look at assembly requirements and finish level. We look at access for the project. The job can call for standard board. It can call for moisture-resistant board. It can call for a fire-rated or acoustic assembly. It depends on what the space calls for. We work through these details up front. That helps match our approach to the actual project requirements.

4. Site Protection & Trade Coordination.

Before installation begins, we plan the site. We plan staging and access. We plan protection for the work area. We coordinate with other trades on the project. That includes electrical and plumbing work. It includes HVAC and insulation work. Some of that work happens beside the drywall scope. Some happens before it. We organize this in advance. That keeps the work area in order. It reduces unnecessary conflicts.

5. Framing & Drywall Installation

The site is now prepared. We complete the framing that applies. We complete backing and insulation coordination. Then comes the drywall installation itself. This is where the wall and ceiling surfaces take shape. They follow the plan set earlier. This step establishes the surfaces. The rest of the process builds on them for finishing.

6. Taping, Compound & Finishing

The board is installed. Now we apply drywall tape, joint compound, and corner bead. Then we sand the surface. We finish it to the agreed level. We reference the Gypsum Association's GA-214 Levels of Finish. The finish level depends on the plan. A garage needs less finishing work. A storage area needs less too. An office needs more. A living space needs more. This produces a surface ready for the next finish stage. That stage can be painting. It can be another trade's work.

7. Quality Review & Punch List

We do not call the job complete yet. First, we review the finished drywall surfaces. We address any punch-list items we find. This gives us a chance to catch visible finishing issues. The crew is still on-site. We address these details before handoff. That helps avoid a return visit. The issue could have been caught during the walkthrough.

8. Cleanup & Handoff

Finally, we clean the work area. We prepare the completed drywall scope. It is ready for painting. It is ready for occupancy. It is ready for the next trade. We remove debris and supplies. The space is left ready for what comes next. This step gives a defined completion point. It marks the end of the drywall portion of the project.

How Much Does Commercial Drywall Installation Cost in Mount Dora, FL?

Commercial drywall pricing varies a lot from project to project. Many factors shape the price. They include wall and ceiling square footage. They include framing requirements. They include board type and finish level. They include ceiling height, site access, and project size. They include fire-rated or acoustic requirements. They include scheduling, local labor, and material pricing. They include demolition and disposal. They include lifts and firestopping. They include painting, permits, and other scope items.

We provide a rough estimate of our pricing in the table below. Regional labor markets can shift these figures. The shift can be roughly 20% to 50% in either direction. We recommend a local estimate. Ask us for one to get an actual project price.

What Is Needed for a Commercial Drywall Estimate?

A formal estimate should rest on solid inputs. Those are drawings and measurements. Those are specifications and site access. Those are material requirements and finish expectations. Those are local project conditions. Is the project a larger commercial job? Then the estimate should account for more. It should cover the specified wall and ceiling assemblies. It should cover trade coordination. It should cover access requirements and the project schedule.

Commercial Project Site	Typical Drywall Scope	Planning Range	Main Cost Variables	Includes / Excludes
Small Office Suite	Interior partitions, ceilings, doors/openings, standard finish	$1.50–$2.50/sq ft (standard board); up to $4.80/sq ft where fire-rated partitions are specified	Square footage, partitions, ceiling height, finish level, access	Excludes painting, permits, and other trades
Retail Store / Showroom	Partitions, feature walls, ceilings, soffits, finishing	$1.50–$2.50/sq ft (standard board)	Layout complexity, ceiling design, finish level, schedule, access	Scope must be confirmed from plans and site conditions
Medical / Dental Office	Partitions, treatment rooms, corridors, ceilings, specialty assemblies	$1.65–$2.75/sq ft (moisture-resistant); $1.60–$4.80/sq ft (fire-rated). $5.40–$7.20/sq ft where abuse-resistant board is specified	Room count, fire/acoustic/impact requirements, MEP coordination, finish	Specialized requirements must be verified from project specifications
Restaurant / Food-Service Space	Partitions, ceilings, soffits, service-area walls, finishing	$1.65–$2.75/sq ft (moisture-resistant board)	Moisture exposure, penetrations, ceiling details, schedule, access	Other construction and specialty systems not automatically included
Warehouse Office / Industrial Space	Office partitions, enclosed rooms, ceilings, finishing	$1.50–$2.50/sq ft (standard board)	Wall height, access, framing, insulation, finish requirements	Industrial-area scope varies by project
Multifamily Common Area / Tenant Floor	Unit partitions, corridors, common spaces, ceilings	$3.55–$8.50/sq ft (sound-rated/acoustic assemblies)	Unit count, repetition, fire/acoustic assemblies, scheduling	Final inclusions depend on plans, specifications, and measured scope

*Disclaimer: These are approximate planning ranges. They are not a quote. Final pricing in Mount Dora depends on the measured scope. It depends on specifications and supplies. It depends on labor and access. It depends on schedule and project conditions.

What Our Mount Dora, FL Customers Say

We also serve homeowners and businesses in many nearby towns. They include Sorrento, Astatula, Howey-in-the-Hills, and Umatilla. They include Fruitland Park, Lady Lake, Zellwood, and Apopka. They include Clermont, Groveland, Winter Garden, and Ocoee. They include Sanford, Longwood, Altamonte Springs, and DeBary.

Get a Drywall Estimate in Mount Dora, FL

Do you need commercial drywall installation? Do you need residential drywall installation? We also do drywall repair. We do drywall replacement. We do metal stud framing. We do drywall finishing. We work in Mount Dora, Eustis, Tavares, and Leesburg. Mount Dora Drywall Pros can look at your project. We will help set the right scope for the work. Our phone lines are open 24/7.

Book Now!

Drywall FAQs in Mount Dora, FL

We can install Type X drywall as part of a specified fire-resistance assembly. The fire rating depends on the complete assembly design. The design must be tested or UL-listed. Designs sit in the Gypsum Association's GA-600. That is the Fire Resistance and Sound Control Design Manual. An assembly includes board layers. It includes framing and fasteners. It includes insulation and firestopping. The rating does not rest on the drywall panel alone.

Yes. Commercial and home drywall work often needs to line up with other parts. Those are electrical boxes and plumbing lines. Those are HVAC parts and insulation. We review these elements early. We review them during the framing and pre-drywall stage. So the board installation coordinates well with the other trades.

It depends on the damage. It depends on the extent of the damage. It depends on the cause. Minor holes are usually good candidates for repair. Cracks and nail pops are too. Saturated board is often better replaced. Delaminated or severely cracked board is too. We assess the affected area. Then we recommend the right approach for that damage.

Yes. We repair drywall hit by plumbing leaks. We repair drywall hit by roof leaks. We repair drywall hit by appliance failures. Damaged board is most times removed and replaced. That happens after the moisture source is fixed. It happens after proper drying has been coordinated.

In many repair jobs, we can assess the surrounding texture. We can attempt to match it. That match is part of the finishing process. Texture matching can vary. It depends on the existing pattern. It depends on age and paint finish. So we evaluate results on a project-by-project basis.

Yes. We can support general contractors and builders. We can support property managers too. The work is drywall scopes in Mount Dora. The area includes Eustis, Tavares, and Leesburg. The scopes include installation and framing. They include partitions and finishing. The work ties to a larger construction or renovation project.

Recent Project in Mount Dora, FL

Drywall ceiling repair in Mount Dora, FL

Representative project. The details below are a typical example for this area. They stand in until real job records from the crew replace them.

Homeowner: Beth — Mount Dora, FL

The problem:A roof leak had stained the ceiling and the board sagged in one corner.

What Beth told us: Beth had the roof fixed first. Then she wanted the ceiling sound and clean before guests came for the holidays.

Scope of work: Cut out a water-stained section of ceiling board. Fit new board, taped the seams. Matched the light knockdown texture.

Materials and gear: Half-inch drywall board, joint compound, knockdown texture. Size: 80 sq ft (8 by 10 ft).

Final price: $720. Time on site: 1 day.

Cost note:Small ceiling repairs run higher per foot than full rooms because of setup. Texture match, and dust control.

Outcome: The ceiling is flat and the stain is gone. Beth said guests never spot the repair.

See Recent Work

Photos and full project stories from jobs near you.

View the gallery · See project results