Project Results in Mount Dora, FL
Mount Dora Drywall Pros does drywall work across Mount Dora. FL and the towns around it. The projects below are representative examples. Each one shows the full job data: the service, the scope. The supplies, the size, the final price. The time on site. They stand in until real job records from the crew replace them, one for one.
Drywall ceiling repair in Mount Dora, FL
Representative project. The details below are a typical example for this area. They stand in until real job records from the crew replace them.
Homeowner: Beth — Mount Dora, FL
The problem:A roof leak had stained the ceiling and the board sagged in one corner.
What Beth told us: Beth had the roof fixed first. Then she wanted the ceiling sound and clean before guests came for the holidays.
Scope of work: Cut out a water-stained section of ceiling board. Fit new board, taped the seams. Matched the light knockdown texture.
Materials and gear: Half-inch drywall board, joint compound, knockdown texture. Size: 80 sq ft (8 by 10 ft).
Final price: $720. Time on site: 1 day.
Cost note:Small ceiling repairs run higher per foot than full rooms because of setup. Texture match, and dust control.
Outcome: The ceiling is flat and the stain is gone. Beth said guests never spot the repair.
Residential drywall repair in Eustis, FL
Representative project. The details below are a typical example for this area. They stand in until real job records from the crew replace them.
Homeowner: Ray — Eustis, FL
The problem: Hairline cracks ran along the ceiling seams in three rooms. They came back each time Ray painted over them.
What Ray told us: Ray wanted the cracks fixed for good, not just covered. He asked what kept them coming back.
Scope of work: Fixed cracked seams in three rooms. Re-taped the joints, floated fresh compound. Sanded smooth for paint.
Materials and gear: Paper tape, setting compound, finish compound. Size: 3 rooms, about 46 linear ft of seams.
Final price: $540. Time on site: 1 day.
Cost note:Seam repairs in this area often run $150 to $300 per room.
Outcome: The seams are tight and smooth. A year on, Ray says the cracks have not come back.
Drywall finishing for a room addition in Tavares, FL
Representative project. The details below are a typical example for this area. They stand in until real job records from the crew replace them.
Homeowner: June — Tavares, FL
The problem: The addition had bare hung board with open seams. It could not be painted or used until it was finished.
What June told us: June had waited months on the build. She wanted the room done so her mother could move in.
Scope of work: Taped, mudded, and finished new board in a home addition. Three coats, sanded smooth, ready for primer and paint.
Materials and gear: Paper tape, joint compound in three coats, corner bead. Size: 600 sq ft of board.
Final price: $1,800. Time on site: 4 days.
Cost note:About $3.00 per sq ft for finish work on new board. Inside the local $1.50 to $3.50 range.
Outcome: The room finished smooth and clean. June's mother moved in the next month.
Want results like these at your home? Ask for a free written estimate. You get the price before any work starts.